SONIC STOMP MAXIMIZER
Rp. 1.050.000
The Sonic Stomp is a stomp-box version of our ever-popular Sonic Maximizer. The Sonic Stomp was carefully designed to deliver the same sonic improvement as our rack-mounted 482i Sonic Maximizer, adding clarity, definition and punch to any instrument.
The Sonic Stomp is a stomp-box version of our ever-popular Sonic Maximizer. The Sonic Stomp was carefully designed to deliver the same sonic improvement as our rack-mounted 482i Sonic Maximizer, adding clarity, definition and punch to any instrument.
Applications:
• Acoustic-Electric instruments • Basses • Guitars • Keyboards • Electronic Drums/Samplers/Beatmachines Features include: • Sonic Maximizer • Lo contour and process controls • ¼: inputs and outputs • True hard-wire bypass |
Specifications:
• Frequency Response: Program Dependent • BBE: Lo Contour +12dB @ 50Hz • Process +12dB @ 10kHz • Signal to Noise Ratio: BBE on Max 94dB • BBE on Min 104dB • THD: 0.02% at 1kHz • Noise: BBE on Max -87dBu • BBE on Min: -97dBu • Max Signal Level: +7dBu • Impedance: 1MEG Ohms • Output Impedance: 1K Ohm • * 0dBu = 0.775Vrms • Hardware Bypass: YES • Power Requirements: • DC inlet: +9VDC min. 200ma • Battery Life: 15 hours |
GREEN SCREAMER
Rp. 900.000
Vintage overdrive
The Green Screamer is a vintage overdrive capable of producing a dynamic range of smooth and warm overdrive tones associated with vintage tube amps.
Applications:
• Basses
• Guitars
• Keyboards
Features include:
• Vintage overdrive
• Level, tone and gain controls
• ¼: inputs and outputs
• True hard-wire bypass
Specifications:
• Input Impedance: 1MEG Ohms
• Output Impedance: 1K Ohm
• Hardwire Bypass: Yes
• Power Requirements:
DC inlet: +9VDC min. 200ma
Battery Life: 300 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 3.3 lbs
Vintage overdrive
The Green Screamer is a vintage overdrive capable of producing a dynamic range of smooth and warm overdrive tones associated with vintage tube amps.
Applications:
• Basses
• Guitars
• Keyboards
Features include:
• Vintage overdrive
• Level, tone and gain controls
• ¼: inputs and outputs
• True hard-wire bypass
Specifications:
• Input Impedance: 1MEG Ohms
• Output Impedance: 1K Ohm
• Hardwire Bypass: Yes
• Power Requirements:
DC inlet: +9VDC min. 200ma
Battery Life: 300 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 3.3 lbs
CRUSHER DISTORTION
Rp. 800.000
The Crusher features a high-gain distortion coupled with a passive 3-band EQ (bass, mid and treble) that provides the player with a wide range of distortion effects; from a mild crunch to over-the-top, in-your-face distortion.
Applications:
• Basses
• Guitars
• Keyboards
Features include:
• High-gain distortion
• Gain, volume and passive 3-band EQ (bass, mid and treble) controls
• ¼: inputs and outputs
• True hard-wire bypass
Specifications:
• Input Impedance: 1MEG Ohms
• Output Impedance: 1K Ohm
• Hardwire Bypass: Yes
• Power Requirements:
DC inlet: +9VDC min. 200ma
Battery Life: 300 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 3.3 lbs
The Crusher features a high-gain distortion coupled with a passive 3-band EQ (bass, mid and treble) that provides the player with a wide range of distortion effects; from a mild crunch to over-the-top, in-your-face distortion.
Applications:
• Basses
• Guitars
• Keyboards
Features include:
• High-gain distortion
• Gain, volume and passive 3-band EQ (bass, mid and treble) controls
• ¼: inputs and outputs
• True hard-wire bypass
Specifications:
• Input Impedance: 1MEG Ohms
• Output Impedance: 1K Ohm
• Hardwire Bypass: Yes
• Power Requirements:
DC inlet: +9VDC min. 200ma
Battery Life: 300 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 3.3 lbs
FREE FUZZ
Rp. 1.325.000
The Free Fuzz was patterned after a rare and sought - after silicon transistor fuzz pedal made famous by players like Jimi Hendrix in the late ‘60s and provides a wide range of creamy, dynamic fuzz effects with an almost endless amount of sustain for soloing and chunky rhythms.
Applications:
• Basses
• Guitars
Features include:
• Vintage ‘70s fuzz
• Biased matched silicon transistors
• Volume and fuzz controls
• ¼: inputs and outputs
• True hard-wire bypass
Specifications:
• Input Impedance: approx. 1MEG Ohms
• Output Impedance: 1K Ohm
• Bypass: Yes
• Power Requirements:
DC inlet: +9VDC min. 200ma
Battery Life: 600 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 3.3 lbs
The Free Fuzz was patterned after a rare and sought - after silicon transistor fuzz pedal made famous by players like Jimi Hendrix in the late ‘60s and provides a wide range of creamy, dynamic fuzz effects with an almost endless amount of sustain for soloing and chunky rhythms.
Applications:
• Basses
• Guitars
Features include:
• Vintage ‘70s fuzz
• Biased matched silicon transistors
• Volume and fuzz controls
• ¼: inputs and outputs
• True hard-wire bypass
Specifications:
• Input Impedance: approx. 1MEG Ohms
• Output Impedance: 1K Ohm
• Bypass: Yes
• Power Requirements:
DC inlet: +9VDC min. 200ma
Battery Life: 600 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 3.3 lbs
BOOSTA GRANDE
Rp. 900.000
Transparent clean boost
The Boosta Grande is a transparent clean boost that is designed to produce up to 20dB of clean gain and benefit the player needing more volume or gain without changing their tone.
Applications:
• Basses
• Guitars
Features include:
• Transparent Clean Boost
• 20dB of clean gain
• Gain control
• ¼: inputs and outputs
• True hard-wire bypass
Specifications:
• Input Impedance: 1MEG Ohms
• Output Impedance: 1K Ohm
• Hardwire Bypass: Yes
• Power Requirements:
DC inlet: +9VDC min. 200ma
Battery Life: 300 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 3.3 lbs
Transparent clean boost
The Boosta Grande is a transparent clean boost that is designed to produce up to 20dB of clean gain and benefit the player needing more volume or gain without changing their tone.
Applications:
• Basses
• Guitars
Features include:
• Transparent Clean Boost
• 20dB of clean gain
• Gain control
• ¼: inputs and outputs
• True hard-wire bypass
Specifications:
• Input Impedance: 1MEG Ohms
• Output Impedance: 1K Ohm
• Hardwire Bypass: Yes
• Power Requirements:
DC inlet: +9VDC min. 200ma
Battery Life: 300 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 3.3 lbs
MIND BENDER
Rp. 1.350.000
The Mind Bender is a dual-mode vibrato/chorus that utilizes a BBD (Bucket Brigade Delay) circuit and produces a wide range of warm, lush vibrato, chorus and rotating speaker effects.
Applications:
• Basses
• Guitars
• Keyboards
Features include:
• Dual-mode analog vibrato/chorus
• Speed and depth controls
• ¼: inputs and outputs
• Vibrato/chorus mode footswitch
• True hard-wire bypass
Specifications:
• Input Impedance: 1Meg Ohms
• Output Impedance: 1K Ohm
• Hardwire Bypass: Yes
• Power Requirements:
DC inlet: +9VDC min.200ma
Battery Life: 100 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 1.8 lbs
The Mind Bender is a dual-mode vibrato/chorus that utilizes a BBD (Bucket Brigade Delay) circuit and produces a wide range of warm, lush vibrato, chorus and rotating speaker effects.
Applications:
• Basses
• Guitars
• Keyboards
Features include:
• Dual-mode analog vibrato/chorus
• Speed and depth controls
• ¼: inputs and outputs
• Vibrato/chorus mode footswitch
• True hard-wire bypass
Specifications:
• Input Impedance: 1Meg Ohms
• Output Impedance: 1K Ohm
• Hardwire Bypass: Yes
• Power Requirements:
DC inlet: +9VDC min.200ma
Battery Life: 100 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 1.8 lbs
OPTO STOMP
Rp. 1.025.000
The Opto Stomp is a transparent optical compressor that provides a wide range of soft-knee compression effects, reminiscent of the best vintage compressors made in the ‘60s.
Applications:
• Acoustic-Electric instruments
• Basses
• Guitars
Features include:
• Vintage optical limiter
• Volume and comp controls
• ¼: inputs and outputs
• True hard-wire bypass
Specifications:
• Frequency Response: 20Hz ~ 20kHz (+/- 1dB)
• Signal to Noise Ratio: 101dB
• THD: 0.01% @ 1kHz
• Noise: -94dBu
• Input Impedance:
Instrument: 1 MEG Ohm
• Output Impedance:
Instrument: 1 kOhms
* 0dBu = 0.775Vrms
• Power Requirements:
Battery: 9VDC
Battery Life: 50 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 3.3 lbs
The Opto Stomp is a transparent optical compressor that provides a wide range of soft-knee compression effects, reminiscent of the best vintage compressors made in the ‘60s.
Applications:
• Acoustic-Electric instruments
• Basses
• Guitars
Features include:
• Vintage optical limiter
• Volume and comp controls
• ¼: inputs and outputs
• True hard-wire bypass
Specifications:
• Frequency Response: 20Hz ~ 20kHz (+/- 1dB)
• Signal to Noise Ratio: 101dB
• THD: 0.01% @ 1kHz
• Noise: -94dBu
• Input Impedance:
Instrument: 1 MEG Ohm
• Output Impedance:
Instrument: 1 kOhms
* 0dBu = 0.775Vrms
• Power Requirements:
Battery: 9VDC
Battery Life: 50 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 3.3 lbs
SOUL VIBE
Rp. 1.300.000
The Soul Vibe is a vintage vibe/rotary speaker simulator known for its chewy phase-like textures made popular in the late ‘60s and ‘70s by such players as Jimi Hendrix, David Gilmour and Robin Trower.
Applications:
• Basses
• Guitars
• Keyboards
Features include:
• Vintage vibe/rotary speaker simulator
• Speed and Intensity controls
• ¼: inputs and outputs
• True hard-wire bypass
Specifications:
• Input Impedance: 82k Ohms
• Output Impedance: 1K Ohm
• Hardwire Bypass: Yes
• Power Requirements:
DC inlet: +9VDC min.200ma
Battery Life: 100 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 1.8 lbs
The Soul Vibe is a vintage vibe/rotary speaker simulator known for its chewy phase-like textures made popular in the late ‘60s and ‘70s by such players as Jimi Hendrix, David Gilmour and Robin Trower.
Applications:
• Basses
• Guitars
• Keyboards
Features include:
• Vintage vibe/rotary speaker simulator
• Speed and Intensity controls
• ¼: inputs and outputs
• True hard-wire bypass
Specifications:
• Input Impedance: 82k Ohms
• Output Impedance: 1K Ohm
• Hardwire Bypass: Yes
• Power Requirements:
DC inlet: +9VDC min.200ma
Battery Life: 100 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 1.8 lbs
TREMOR
Rp. 1.300.000
The Tremor is a dual-mode tremolo that utilizes an optical circuit to create a wide range of warm pulsating sounds normally associated with the “vibrato” effect of vintage tube amps. The Tremor offers the flexibility of two independent speed controls that are foot switchable, enabling a player to select between a slow and fast tremolo at the stomp of a switch.
Applications:
• Basses
• Guitars
• Keyboards
Features include:
• Dual-mode optical tremolo
• Speed 1, Speed 2 and Depth controls
• Speed 1/ Speed 2 mode footswitch
• ¼: inputs and outputs
• True hard-wire bypass
Specifications:
• Input Impedance: 1MEG Ohms
• Output Impedance: 1K Ohm
• Bypass: True Hardwire
• Power Requirements:
DC inlet: 9VDC (- Tip)
Battery Life: 300 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 1.8 lbs
The Tremor is a dual-mode tremolo that utilizes an optical circuit to create a wide range of warm pulsating sounds normally associated with the “vibrato” effect of vintage tube amps. The Tremor offers the flexibility of two independent speed controls that are foot switchable, enabling a player to select between a slow and fast tremolo at the stomp of a switch.
Applications:
• Basses
• Guitars
• Keyboards
Features include:
• Dual-mode optical tremolo
• Speed 1, Speed 2 and Depth controls
• Speed 1/ Speed 2 mode footswitch
• ¼: inputs and outputs
• True hard-wire bypass
Specifications:
• Input Impedance: 1MEG Ohms
• Output Impedance: 1K Ohm
• Bypass: True Hardwire
• Power Requirements:
DC inlet: 9VDC (- Tip)
Battery Life: 300 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 1.8 lbs
TWO TIMER
Rp. 1.675.000
The Two Timer was inspired by the long discontinued DM-2 Delay, which was known for its warm, haunting reverb and tape-like echoes. The Two Timer offers two independent delay times foot switchable via the Time1/Time2 mode footswitch. This makes it possible to have one delay set up for a short slapback rhythm sound while another is set longer for solos.
Applications:
• Guitars
• Keyboards
Features include:
• Dual-mode analog delay
• Time 1, Time 2, repeat and mix controls
• Time 1/Time 2 mode footswitch
• ¼: inputs and outputs
• True hard-wire bypass
Specifications:
• Input Impedance: 1 MEG Ohms
• Impedance: 1K Ohm
• Delay Range: 0ms-330ms
• Bypass: True Hardwire
• Power Requirements:
DC inlet: 9VDC (- Tip)
Battery Life: 30 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 1.8 lbs
The Two Timer was inspired by the long discontinued DM-2 Delay, which was known for its warm, haunting reverb and tape-like echoes. The Two Timer offers two independent delay times foot switchable via the Time1/Time2 mode footswitch. This makes it possible to have one delay set up for a short slapback rhythm sound while another is set longer for solos.
Applications:
• Guitars
• Keyboards
Features include:
• Dual-mode analog delay
• Time 1, Time 2, repeat and mix controls
• Time 1/Time 2 mode footswitch
• ¼: inputs and outputs
• True hard-wire bypass
Specifications:
• Input Impedance: 1 MEG Ohms
• Impedance: 1K Ohm
• Delay Range: 0ms-330ms
• Bypass: True Hardwire
• Power Requirements:
DC inlet: 9VDC (- Tip)
Battery Life: 30 hours
• Dimensions: 3.7"(W) x 4.7"(D) x 1.8"(H)
• Shipping Weight: 1.8 lbs